Laboratory Instruments

Pen Type Instruments
Jenco, 618N pH Meter
  • Graphical LCD provides on-screen menu selection for manual-free, easy operation.
  • IP67-rated, water-proof dust-proof body.
  • Real-time date and time display.
  • 1,2, or 3-point calibration, with automatic buffer recognition of us and NIST buffer sets.
  • Replaceable electrode module ensures extended usefulness.


Jenco, 628N ORP Meter
  • Clear graphic LCD displays ORP and temperature at the same time
  • Replaceable electrode module ensures extended usefulness
  • IP67 water-proof, dust-proof body
  • Battery life over 300 hours
  • 50 memory storage of both ORP and temperature readings with memory location ID and date and time stamp
Jenco, EC330 EC/TDS Meter
  • Simultaneous display of conductivity and temperature, or TDS and temperature
  • 1 or 2-point calibration
  • Automatic temperature compensation
  • Selectable or auto-ranging of conductivity and TDS readings
  • Replaceable conductivity cell
  • 6 selectable units of measure (uS/cm, mS/cm, mg/L, g/L, °C, °F

Jenco, pH/EC80 Meter
  • Simultaneously measures pH, Conductivity, TDS, Salinity, and temperature without switching the probe
  • Graphic LCD display
  • Auto temperature compensation
  • Auto shut down feature
  • Replaceable pH/Conductivity electrode module
  • 50 sets of data memory
  • IP67 waterproof
  • Battery life >100hrs
Handheld Type Instruments
Jenco, pH6810  pH/ORP
  • Large LCD with dual display of pH and temperature or ORP and temperature
  • IP67-rated water-proof and dust-proof case
  • 2 or 3-point calibration
  • Manual or automatic temperature compensation
  • US or NIST buffer sets
  • Electrode efficiency in percentage


Jenco, 6360  pH/ORP & EC/TDS
  • The Jenco 6360 is a high-performance pH/ORP/Conductivity/Salinity/TDS/Temp. handheld meter in a splashproof case with an RS-232C interface that allows it to communicate with any PC 
  • Automatic buffer recognition of US and European buffer sets
  • Store 50 sets of data in non-volatile memory
  • Battery/ac adaptor
  • RS-232 (Modbus) output
Jenco, 6011 pH Meter
  • up to 3 Point calibration (pH)
  • Automatic or manual temperature compensation (pH)
  • Each and every unit is hand-calibrated and QC’ ed by at least 2 teams
  • Clear, large LCD
  • Membrane buttons with tactile feedback On-device memory storage
  • IP67 water-tight housing
  • Removable, rugged protective case

QIS, F470 pH/ION Meter
  • pH: -2.000 ~ 19.999
  • mV (rel. mV): -1999 ~ 1999
  • Temperature: -5.0 ~ 130 °C
  • Sensor inputs: BNC (>1012Ω); NTC 30KΩ (both IP67)
  • Power requirements: 4 AA batteries 1.5V or NiMH accumulators 1.3V
  • Size / Weight: 220 x 90 x 45mm / 325g (without batteries)
Jenco, 9011M DO2 Meter
  • 1 Point calibration (DO)
  • Each and every unit is hand-calibrated and QC’ed by at least 2 teams
  • CE, RoHS complaint
  • Clear, large LCD
  • Membrane buttons with tactile feedback On-device memory storage
  • IP67 water-tight housing

Sensorex, FCLA7000 Chlorine Meter
  • Measurement Method: Photometric
  • Programmed Tests: Free chlorine, Chlorine dioxide
  • Free chlorine range: 0 -11ppm (CL1<6ppm,HR>6ppm)
  • Chlorine dioxide** Range: 0 - 6.5ppm (TR7)
  • Transmission Range: 100 - 0.00 %T


QIS,  QT900/R Turbidity Meter
  • Range Auto-ranging from 0 - 1100 NTU
  • Resolution 0.01 NTU < 100 NTU
  • Accuracy ± 2% of reading or ± 0.01 NTU (0-500 NTU)
  • Response time 14 seconds
  • Power supply 4 - AAA alkaline batteries (over 5000 tests)
  • Display 4 digit (7 segment) LCD
  • Principle of operation Nephelometric
E+H, CML18 Multipameter
  • Use your existing tablets and smartphones for operation and commissioning.
  • Memosence sensors offer you the safest data transmission.
  • Using the same technology for process and laboratory.
  • Grab sample measurements to provide you with full consistency.
  • Flexible use wherever it is needed, from the laboratory to the process. 
Table Top Instruments
Sensorex, PM1000 pH/ORP Meter
  • Sensorex Benchtop pH/ORP Meter is the perfect solution for a range of applications from instructional chemistry laboratories to quality control testing.
  • Our waterproof pH and ORP meter helpfully prompts you through the calibration and measurement procedures
  • This versatile meter can be powered in two ways, either with 6 AAA batteries to save your valuable bench space or with an AC power cable. 
Jenco, 6177 pH/ORP Meter
  • Repeatable readings with 0.01 pH and 0.1 mV resolution
  • up to 5 Point calibration (pH); 1 Point calibration (mV)
  • Non-volatile memory holds up to 750 data points
  • Simple calibration with automatic buffer recognition of US and European buffers
  • Large, high-contrast LCD
  • AC adaptor or battery-powered
Digital Instruments, Gold533 pH Meter
  • Range 0.00 to 14.00 pH0 to ± 1999 mV
  • Resolution 0.01 pH ± 1 mV
  • Accuracy 0.01 pH ± 1 digit 1 mV ± 1 digit
  • Temp. Range 0 to 150.0°c with continuous digital display
  • Temp. Resolution 0.1° c
  • Display 16 Character X 2 Lines Liquid Crystal Display
  • Supply 220V AC ± 10%, 50Hz
  • Dimension 180mm x 130mm
Jenco, 6173R pH Meter (RS232)
  • Larger LCD display
  • Electrode offset recognition
  • Electrode slope recognition
  • Built-in buffer temp. coefficient
  • Power down memory
  • Battery/AC adaptor
  • Low power consumption
  • Battery low indicator
  • Percentage of power supply display
  • RS-232 output
Jenco, 3173R EC/TDS Meter (RS232)
  • Conductivity Range K=0.1 0.00 uS/cm to 2000 uS/cm
  • TDS Range K=0.1 0.00 ppm to 1000 ppm
  • Basic Cell Constant K=0.1, k=1.0 or k=10, user selectable
  • Output RS-232
  • Power Supply 100 ~ 240 VAC adapter or AA x 6 batteries
  • Dimensions (w x d x h )165 x 230 x 80 mm
Jenco, 3177M EC/TDS Meter
  • Conductivity/TDS Range K=0.1 0.00 to 200.0 uS/cm / 0.00 to 200.0 mg/L
  • Temperature Range 0.0 to 100.0 °C
  • Basic Cell Constant K=0.1 or K=0.475, user selectable
  • Power Supply 100 to 240 V AC adapter or AAA x 6 Batteries
  • Dimensions (w x d x h ) 150 x 210 x 45 mm
Sensorex, CM1000 EC/TDS Meter
  • Cell Constants: 0.1, 1.0, 10
  • Reference Temperature: 15-25° user selectable in 0.1° increments
  • Reference Coefficient: 0.00-4.00% user selectable at 0.01% increments
  • Range: 0 to 50°C
  • Dimensions: 5.9 in (150 mm) x 8.0 in (203 mm) x 2.8 in (72 mm)
  • Power Supply: 6 x AAA batteries or 115/230 V AC adapter
Digital Instruments, D 511 EC/TDS Meter
  • ranges For TDS :- 20ppm-200ppm,2000ppm-200ppt 
  • conductivity:-20μS/cms-200μS/cms, 2000μS/cms-200m/cms
  • Cell 1.0 Cell constant +/- 10% (Platinum Cell)
  • Power Requirement 230V A.C +/-10%, 50Hz single phase
  • Dimensions 205x65x130mm(Alluminium powder coated cabinet )

...and many more types of laboratory Instruments , contact sales@innovativeanalyticals.net